Outdoor ATM installation
A protected site without altering a building
A cash machine outdoors needs a room that carries, protects and supplies it. The Veloform ATM pavilion is built exactly for that: a closed concrete body in which the machine is installed at our works and which only needs connecting on site.
The result is an ATM site with no intervention in an existing building – in a car park, in front of a branch, on a market square or on company premises.
- Cash machine installed at the works, only connections remain on site
- Closed shell of steel-reinforced concrete, walls 12–20 cm thick
- Double door system: steel outer door RC2, stainless grille door RC4
- Suitable for all common types of cash machine
- Transportable in one piece and relocatable later
No building work
The pavilion stands on its own. Neither the facade nor the layout of an existing building has to be touched – an advantage wherever a branch is closed, reduced or replaced.
Built secure
The shell is made of steel-reinforced concrete with walls 12 to 20 cm thick. The door system is double: a steel outer door in RC2 and a stainless steel grille door in RC4, plus a safety cable on the rear door and anti-entry protection.
Complete from the works
Production takes place at our works in Vockerode, including the electrical installation, sub-distribution and fitting of the cash machine. The pavilion is delivered in one piece, set down by loading crane and can later be relocated in one piece as well.
Typical sites
- Retail and shopping centre car parks
- In front of existing branches
- Market squares and town centres
- Company premises and industrial estates
- Transport hubs and station surroundings
From enquiry to installation
Every room system is built at our works in Vockerode and leaves the hall fully fitted out. It is installed in one piece, which keeps work on site short.
- 01
Enquiry and advice
You describe the site, the intended use and the equipment you need. Together we choose the right variant and the optional extras.
- 02
Planning and design
Dimensions, layout and exterior finish are matched to your project. The design follows your brand, from the base coat to the backlit exterior panel.
- 03
Production at the works
The steel-reinforced concrete shell is produced at our works. Electrical installation, interior fit-out and – for ATM pavilions – the cash machine are installed there.
- 04
Delivery and installation
The room system is delivered in one piece and set down by loading crane. Only the connections remain to be made on site.
- 05
Relocate instead of demolish
If requirements change, the same room system is moved to a new site in one piece.
Frequently asked questions
Does every cash machine fit the pavilion?
The ATM pavilions are suitable for all common types of cash machine. Installation takes place at our works.
What has to be prepared on site?
A load-bearing surface plus power and data connections are needed. The pavilion is set down by loading crane and then connected.
How is the machine protected against attack?
The shell is steel-reinforced concrete with walls 12 to 20 cm thick and the door system is double. The pavilions were developed together with the banks' insurers.
Can the site be changed later?
Yes. The pavilion is lifted in one piece and set down again at another site.
Send us your enquiry
We will reply as soon as possible.
Alternatively
Veloform GmbHGriesener Straße 31
06785 Oranienbaum-Wörlitz
OT Vockerode
Germany
+49 (0) 34905 12 47 0
info@veloform.com
Mon – Fri: 07:00 – 15:30
slube hotel towers: please address enquiries about this product area directly to our operating company slube GmbH. slube GmbH